4 Replacement Procedures
4.19 Harness assembly/Hinge
Removing the Harness assembly/Hinge
To remove the harness assembly/hinge, follow the steps below and refer to Figure 4-30 to 4-
35.
1. Remove the following screw and LCD harness holder B.
• M2.5×6S
2. Remove the following screw and LCD harness holder A (plastic).
• M2.5×6S
LCD harness holder B
4-50
[CONFIDENTIAL]
Tapping screw
Tapping screw
Figure 4-30 Removing the LCD harness holder
4.19 Harness assembly/Hinge
×1
×1
M2.5×6S Tapping
LCD harness holder A
libretto U100 Maintenance Manual (960-520)