Toshiba A100 VA3 - Satellite - Pentium Dual Core 1.6 GHz Maintenance Manual page 253

4 Replacement Procedures
4. Bezel set
<Procedure>
1) Hook the upper side (TAB side) of bezel to the three latches of frame. •
2) Latch the side.
3) Mate the lamp side. ‚
Caution: 1. Do not damage the TAB.
2. Make sure the three latches of bezel are hooked.
3. The PCB GND-CU shall be within the bezel.
PCB GND-CU shall
be within the bezel.
Figure 4-53 Replacing TDM fluorescent lamp(10)
4-66
4.25 Fluorescent lamp
PCB GND-CU shall be
within bezel.
Folding of reflector
shall be within bezel.
PORTEGE A100 Maintenance Manual (960-460)