4 Replacement Procedures
4.15 Bluetooth module
Removing the Bluetooth module
To remove the Bluetooth module, perform the following procedure. (See Figure 4-21.)
1. Remove the flat cable from the connector of the Bluetooth module.
2. Remove the following screw and Bluetooth module.
3. Disconnect the bluetooth antenna cable from the Bluetooth module.
M2 3C S-THIN
Bluetooth antenna cable
Installing a Bluetooth module
To install a Bluetooth module, perform the following procedure. (See Figure 4-21.)
1. Connect the bluetooth antenna cable to the Bluetooth module.
2. Fix a Bluetooth module with the following screw.
3. Connect the flat cable to the Bluetooth module.
4-30
M2 3C
S-THIN screw
Figure 4-21 Removing the Bluetooth module
M2 3C
S-THIN screw
4.15 Bluetooth module
x1
Bluetooth module
x1
PORTEGE A100 Maintenance Manual (960-460)
Flat cable