Regulatory Compliance Markings; Electromagnetic Compatibility Notice (Usa) - Intel SLWBR - Server Platform - LB440GX 2U Technical Specifications

©
Intel LB440GX 2U Rack Server Chassis TPS Rev 1.0

11.1.3 Regulatory Compliance Markings

This product is provided with the following Product Certification Markings.
UL, cUL Listing Marks
CE Mark and CE Declaration of Conformity
The CE marking on this product indicates that it is in compliance with the European
community's EMC (89/336/EEC) and low voltage directives (73/23/EEC)
NEMKO Mark
German GS Mark
FCC, Class B Markings (Declaration of Conformity)
ICES-003 (Canada Compliance Marking)
C-Tick Mark (Australia Compliance Marking)
11.2

Electromagnetic Compatibility Notice (USA)

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on; the user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the grantee of this device could void the
user's authority to operate the equipment. The customer is responsible for ensuring compliance of
the modified product.
Only peripherals (computer input/output devices, terminals, printers, etc.) that comply with FCC Class
B limits may be attached to this computer product. Operation with noncompliant peripherals is likely
to result in interference to radio and TV reception.
All cables used to connect to peripherals must be shielded and grounded. Operation with cables,
connected to peripherals that are not shielded and grounded may result in interference to radio and
TV reception.
NOTE
If a Class A device is installed within this system, then the system is
to be considered a Class A system. In this configuration, operation of
this equipment in a residential area is likely to cause harmful
interference.
18