Completing The Installation - Intel SBXD132 - Server Compute Blade Installation And User Manual

Caution:
9. Make sure that the host blade server is turned on; then, check the hard disk drive
LEDs to make sure that the drive is operating correctly.
— If the green hard disk drive activity LED is flashing, the drive is being accessed.
— If the amber hard disk drive status LED is lit continuously, that drive is faulty and

Completing the Installation

To complete the installation, complete the following tasks:
1. Install the cover on the expansion unit (see
page
2. Insert the combined blade server and expansion unit into the SBCE unit.
Note: Make sure that the SBCE unit has the required number of power modules
3. If you have hot-swap hard disk drives to install in the expansion unit, do so now (see
"Installing a Hot-swap SAS Hard Disk Drive" on page
filler is installed in any disk drive bay that does not contain a hard disk drive.
4. Turn on the blade server.
5. If you have just installed a ServeRAID SAS controller, complete the following steps:
a. If you want to include the host blade server hard disk drives in the expansion unit
RAID, use the configuration utility in the blade server to enable this option (see
the documentation that comes with the blade server for more information).
b. Use a RAID configuration program to create and manage the RAID (see
"Configuring the Expansion Unit RAID Array" on page 52
Intel® Server Compute Blade SBXD132 Installation and User's Guide
Make sure that a drive filler is installed in any disk drive bay that does
not contain a hard disk drive.
must be replaced.
43).
present to supply power to the blade bay in which the expansion unit is
installed. For additional information, see the documentation that comes with
the SBCE unit.
"Installing the Expansion Unit Cover" on
50). Make sure that a drive
for more information).
51