Removing The Ac Distribution Box - IBM Netfinity 4500R Type 8656 Hardware Maintenance Manual

Removing the AC Distribution Box

108
Hardware Maintenance Manual: Netfinity 4500R Type 8656
1
Screw
2
AC distributor box
3
Chassis clips
4
Chassis slot
5
Cable receptacle
To remove the AC distribution box:
1. Remove the cover. See "Removing the cover and bezel" on page 47.
Remove screw 1 .
2.
Pull the AC distribution box 2 toward front of machine in order to release it
3.
from the chassis clips 3 .
4. Remove the two hot-swap power supplies.
Pull down on the cable receptacle 5 to release it from the chassis.
5.
Note: To install the receptacle, push up into the chassis opening of slot 4 . Be
sure to properly replace receptacles, 1 to 1 and 2 to 2 as labeled.