Using The Scsiselect Utility Program; Starting The Scsiselect Utility Program - IBM Netfinity 4500R Type 8656 Hardware Maintenance Manual

Table 6. Power-on and administrator password features.
Type of password
Power-on password
Administrator password
Administrator and power-on
password

Using the SCSISelect utility program

Starting the SCSISelect utility program

36
Hardware Maintenance Manual: Netfinity 4500R Type 8656
• Enter the password to complete the system startup.
• All choices are available on the Configuration/Setup Utility main menu.
• No password is required to start the system.
• Enter the password to access the Configuration/Setup Utility program.
• All choices are available on the Configuration/Setup Utility main menu.
• You can enter either password to complete the system startup.
• The administrator password provides access to all choices on the
Configuration/Setup Utility main menu. You can set, change, or delete both
the administrator and power-on passwords, and allow a power-on
password to be changed by the user.
• The power-on password provides access to a limited set of choices on the
Configuration/Setup Utility main menu. This limited access might include
changing or deleting the power-on password.
SCSISelect is a built-in, menu-driven configuration utility program that you can use
to:
• View the default SCSI IDs
• Locate and correct configuration conflicts
• Perform a low-level format on a SCSI hard disk
The following sections provide the instructions needed to start the SCSISelect Utility
and descriptions of the menu choices available.
Note: If your server has a RAID adapter installed, use the configuration method
supplied with the RAID adapter to view or change SCSI settings for attached
devices.
To start the SCSISelect utility program:
1. Turn on the server.
2. When the
press Ctrl+A.
Note: If an administrator password has been set, a prompt appears asking you to
enter the password to start the SCSISelect Utility program.
3. When prompted, select either channel A (internal) or channel B (external).
4. Use the arrow keys to select a choice from the menu.
• Press Esc to return to the previous menu.
• Press the F5 key to switch between color and monochrome modes (if your
monitor permits).
5. Follow the instructions on the screen to change the settings of the selected items;
then, press Enter.
Results
prompt appears,