Removing the power supply backplane
Removing the AC Distribution Box
c 1 d
Backplane
c 2 d
Insulator
c 3 d
Screws (2)
c 4 d
Plastic retainer
To remove the power supply backplane:
1.
Remove the cover. See "Removing the cover and bezel" on page 47.
Remove power supplies from the backplane c 1 d .
2.
3.
Disconnect cables from the backplane.
Remove the two screws c 3 d .
4.
Remove the plastic retainer c 4 d .
5.
Remove insulator c 2 d and replace on new backplane.
6.
c 1 d
Screw
c 2 d
AC distributor box
c 3 d
Chassis clips
FRU information (service only)
109