Removing The On/Off Reset Board; Removing The Diskette/Cdrom Drive - IBM Netfinity 4500R Type 8656 Hardware Maintenance Manual

Removing the on/off reset board

Removing the diskette/CDROM drive

104
Hardware Maintenance Manual: Netfinity 4500R Type 8656
1
On/Off Reset Board
2
Screw
To remove the on/off reset board:
1. Remove the cover. See "Removing the cover and bezel" on page 47.
2. Disconnect the cables from the system board.
Remove the screw 2 .
3.
Gently pull off the board 1 .
4.
1
Screw
2
12.7MM Diskette/CDROM Drive
To remove the LED board:
1. Remove the cover. See "Removing the cover and bezel" on page 47.
2. Disconnect the cable.
Remove the screw 1 .
3.
Carefully pull out drive 2 to remove.
4.