Compaq ProLiant 8500 Setup And Installation Manual page 67

3-12 Compaq ProLiant 8500 Servers Setup and Installation Guide
1
2
1
Figure 3-9. Opening the media module
4. Press the module stop latches in and pull the module out of the chassis.
5. Set the module aside for adding or replacing the diskette drive or
CD-ROM drive as described in Chapter 4, "Installing Hardware
Options".
WARNING: To reduce the risk of personal injury from hot surfaces, allow the
internal system components to cool before touching them.
NOTE: The top panel labels provide instructions on installing processors, DIMMs,
processor power modules, and hard drives.
6. To reassemble the server, slide the module in until the ejectors begin to
rotate. Then push ejectors shut until they snap into place.
2
2