Prepared by: Industry Standard Server Division Compaq Computer Corporation Contents Abstract: This document provides a description of the Compaq What Is NMI Crash Dump ... 3 ProLiant Class Computer Systems implementation of NMI-based Compaq Automatic Server Crash Dump facilities. This facility can be beneficial to system Recovery (ASR) ......
BUSINESS INFORMATION), EVEN IF COMPAQ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. The limited warranties for Compaq products are exclusively set forth in the documentation accompanying such products. Nothing herein should be construed as constituting a further or additional warranty.
The Compaq health (systems management) driver must be loaded in order to properly differentiate an NMI caused by the dump switch from a PCI SERR NMI. The dump switch operates even if the health driver is not loaded.
ASR does not cover cases where the operating system or applications may be executing in an indeterminate state. These cases would require the system administrator to intervene and initiate the NMI with the crash dump button. Note: All Compaq systems require the Compaq health (systems management) driver to support ASR. Compaq Sysmgmt Driver...
Page 5
Novel SSD. UnixWare support is on the EFS. Note: The push button switch that is connected to the Compaq hardware device is a user-initiated event and may be initiated at any time. This feature does not require any software to generate the NMI.
Compaq ProLiant Server NMI Crash Dump Feature Initiating a NMI Crash Dump Under NetWare 1. User presses the NMI Crash Dump push button switch which will present the user with a abend screen. 2. Depending on the version of NetWare, you may see either an ABEND (Abnormal END) screen or a NetWare debugger screen.
Compaq ProLiant Server NMI Crash Dump Feature 3. To enable the automatic generation of a core dump if an ASR event occurs, the Compaq Health (System Management) driver, cpqw, needs to be configured as follows: • The Health (System Management) driver from the Compaq Extended Feature Set (EFS) version 5.34 (for Sco OpenServer 5) or version 7.34 (For SCO UnixWare 7) must be...
2. User installs Compaq NT SSD 2.13A or higher. Note: Nearly all Compaq servers support ASR NMI with the exception of the ProLiant 400 and the ProSignia 720. The ProLiant 8500 is supported by Compaq NT SSD 2.13A available with SmartStart 4.30 or higher.
Compaq ProLiant Server NMI Crash Dump Feature Compaq Software (subject to change) 1. User installs Compaq NT SSD 5.x (all versions have full support). 2. User sets the Windows NT registry. Enabling ASR NMI Crash Dump: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\cpqasm\Parameters\Featur eASR = (DWORD)0xe11...
Note: The NMI Crash Dump button hardware will generate a PCI SERR under all Operating Systems. Initiating core memory dumps may be attainable under each individual OS. ProLiant 8000 NMI Crash Dump Button Figure 3: NMI Crash Dump Button Located in the ProLiant 8000 PCI Compartment 11N8-0100A-WWEN...
Need help?
Do you have a question about the ProLiant 8000 and is the answer not in the manual?
Questions and answers