Compaq ProLiant 8500 Setup And Installation Manual page 124

To run the System Configuration Utility:
1. Boot the computer from the Compaq SmartStart and Support
Software CD.
2. From the Compaq System Utilities screen, select Run System
Configuration Utility.
3. Select Continue.
4. Select Review or Modify Hardware Settings and press Enter.
5. Select Step 3: View or Edit Details and press Enter.
6. Scroll down until you find the section entitled Embedded Compaq IMD
Module.
7. Highlight the field that you want to modify. You must press Enter to
edit the highlighted item, then type the text for that field. After entering
the text, press Enter to accept the modifications. Each field is discussed
in detail later in this section. See "Customizing Management Display
Fields."
8. Repeat step 7 for each menu item to be modified.
9. Press F10 to exit the View or Edit Details screen.
10. Select Step 5: Save and Exit.
Integrated Management Log 7-3