Compaq ProLiant 8500 Setup And Installation Manual page 63

3-8 Compaq ProLiant 8500 Servers Setup and Installation Guide
2. Push in on the sides of the cam levers 1 on the I/O Module and rotate
the top of the levers downward 2 as shown in the following figure.
1
2
Figure 3-5. Removing the I/O Module
3. Pull the I/O Module out of the chassis until it reaches the module stop
latch.
4. Press the module stop latches in and pull the module out of the chassis
as shown in the following figure.
1
Figure 3-6. Removing the I/O Module from the chassis
2