Customizing Management Display Fields - Compaq ProLiant 8500 Setup And Installation Manual

7-4 Compaq ProLiant 8500 Servers Setup and Installation Guide

Customizing Management Display Fields

11. At the server prompt Save the Configuration and Restart the Computer,
select OK=Enter. The changes you have entered will not be displayed
on the Display Panel until you reboot the computer. Standard Integrated
Management Display fields are defined in the section "Navigating the
Menus" later in this chapter.
12. If you have an older version of the System Configuration Utility
installed on your hard drive, you will be asked if you would like to
upgrade your system partition. You should upgrade your System
Configuration Utility at this time.
You can customize many of the fields shown on the Integrated Management
Display. The following sections define each of the menu choices and include
examples of some fields.
Idle Screen Text
After the display has been idle for five minutes, the Integrated Management
Display shows the following default screen text:
LCD-012.EPS
Figure 7-1. Idle screen text
You can change this text by entering up to 3 lines, with no more than 16
characters on each line. One suggestion would be to enter the server name
here. This would allow an administrator to walk into a room with multiple
servers and immediately locate the desired server.
COMPAQ
ProLiant XXXX
MAIN MENU
ESC