Compaq ProLiant 8500 Setup And Installation Manual page 89

3. Insert the hot-plug drive into the empty drive bay, pushing until securely
seated 1.
4. Secure the hot-plug drive in the drive cage by swinging the ejector lever
inward 2, as shown below.
Figure 4-19. Installing a SCSI hard drive
CAUTION: Before removing any hot-plug hard drive, read the important
guidelines in the following two sections.
5. To remove a hot-plug SCSI hard drive, push the release button on the
left of the drive and rotate the hot-plug drive ejector lever outward to
unlock. Pull the drive out of the drive bay.
Installing Hardware Options 4-21
1
2