Array Configuration Utility - Compaq ProLiant 8500 Setup And Installation Manual

Array Configuration Utility

The Compaq Array Configuration Utility (ACU) is an easy to use graphical
configuration utility to help you set up and change drive array configurations.
It can be used to configure the standard internal drive controller as well as any
option controller boards that you install. This utility:
Provides a graphical view of Compaq drive array configurations
Provides express or custom initial configuration
Supports adding additional capacity
Supports RAID 0, 1/0+1, and 5 fault-tolerant configurations
Supports Raid level and stripe size migration
Helps optimize your array configuration with configuration Wizards
Sets drive rebuild priorities
Allows on-line spare (hot spare) configuration
Allows separate fault tolerance configuration on a logical drive basis
The Array Configuration Utility allows you to complete disk array
configuration quickly and simply without an in-depth understand of RAID or
drive array technology.
SCSI Setup 5-7