Scsi Port 1 For Removable Media Bay - Compaq ProLiant 5500 Setup And Installation Manual

7-14 Cabling
Example 2:
Using One Optional SMART-2 Controller for
Hard Drives, Integrated SCSI Port 1 for
Removable Media Bay
1. Remove the installed SCSI cable (199606-007) from Integrated SCSI
Port 1 and SCSI Input 0 of simplex board.
2. Install the 19-inch point-to-point non-terminated SCSI cable (199606-
007) supplied with the cable option kit (306585-B21) from the optional
SCSI board connector to the SCSI Input 0 connector of the simplex
board.
6
Figure 7-9. Example 2: Configuration diagram
3
2
1
3 3
2 2 6 6
1 1 7 5 5
0 0 4 4
8
For use with Intel Pentium II Xeon processor-based servers only
4
5
9