Compaq ProLiant 5500 Setup And Installation Manual page 79

4-14 Installing Hardware Components
Peripheral Board Switches
The following table defines the switch settings for the peripheral board. The
Open (off) position is the default configuration for each switch.
1.
2.
3.
4.
5.
6.
NOTE: See the ProLiant 5500 Service and Maintenance Guide for information on the use
of this switch.
System Configuration Switch
Switch Open (Off) Position
Video Enable integrated video
Lock Configuration can be
Configuration changed
Rack Mount System is tower configuration
Diskette Diskette boot is controlled by
Override configuration
Password Power on password is
Enable enabled
Maintenance * NV RAM is valid
For use with Intel Pentium II Xeon processor-based servers only
Table 4-4
Closed (On) Position
Disable integrated video
Configuration can not be
changed
System is rack mount
configuration
Diskette is enabled for booting
regardless of configuration
Power on password is disabled
NV RAM is invalidated,
configuration is lost