Examples; Scsi Port 2 For Removable Media Bay - Compaq ProLiant 5500 Setup And Installation Manual

7-12 Cabling

Examples

This section contains example cabling scenarios covering the most common
applications. If your planned configuration does not match one of these
examples, use the SCSI Cable Matrices in Tables 7-1 and 7-2 and these
examples as a general guide.
Example 1:
Standard Configuration - Using
Integrated SCSI Port 1 for Hard Drives,

SCSI Port 2 for Removable Media Bay

The Compaq ProLiant 5500 server ships standard in the simplex mode, as
shown in Figures 7-7 and 7-8. This configuration uses the integrated SCSI
controller to handle all seven SCSI drive slots. SCSI Port 2 can be connected to
the removable bay devices.
5
Figure 7-7. Example 1: Configuration diagram
3
2
1
3 3
2 2 6 6
6
1 1 5 5
0 0 4 4
For use with Intel Pentium II Xeon processor-based servers only
4
8
7