3.
Reconnect the SCSI cables on the back of the drive cage. Refer to Figure
4-18 for connector identification. See Chapter 7, "Cabling," for
information on SCSI cabling.
Figure 4-18.
Connectors on back of drive cage
SCSI input 1
Duplex board power connector
SCSI Input 0
Removable media power connector
Duplex enabler board
For use with Intel Pentium II Xeon processor-based servers only
1
2
3
Compaq ProLiant 5500 Servers Setup and Installation Guide
4
5
4-19