Compaq ProLiant 5500 Setup And Installation Manual page 125

7-10 Cabling
SCSI Cable Usage Matrix for Simplex Mode
Controller
Integrated
SCSI-Port 2
Controller
See Note 2.
Hot-Plug SCSI Hard 2/4 DAT Drive
Drives in Internal 4/8 DAT Drive
Drive Cage Internal TurboDAT
Autoloader
8X SCSI CD-ROM
4/16 TurboDAT
15/30 DLT Drive
In Simplex mode, the
recommended use for
SCSI PORT 2 is for the
removable media bay
devices. If SCSI PORT
1 is unavailable for the
hard drives:
Connect 19-inch
point-to-point
non-terminated
SCSI cable
(199606-007)
from SCSI Port 2
to SCSI Input 0 of
Simplex board.
For use with Intel Pentium II Xeon processor-based servers only
Continued
Connect the 22-inch
3-device terminated SCSI
cable (199616-010) from
SCSI Port 2 to the
removable media bay
devices.
Use 50 to 68 pin adapter
(199618-001) if needed.
See note 1.
35/70 DLT Drive
Connect the 22-inch
3-device terminated
SCSI cable (199616-
010) from SCSI Port 2
to the removable media
bay devices.
Continued