Contrast; Navigating The Menus; Normal Run-Time Behavior; Navigation Buttons - Compaq ProLiant 5500 Setup And Installation Manual

6-10 Integrated Management Display

Contrast

The level of contrast can be adjusted on the Integrated Display by using the UP
and DOWN arrows. Press the UP arrow to increase the contrast, and press the
DOWN arrow to decrease the contrast.

Navigating the Menus

The Compaq Integrated Management Display is menu-driven and easy to use.
Information to navigate and utilize the menus follows.

Normal Run-time Behavior

When powering up the server, the first IMD screen shows the model number
and LCD firmware revision of the server's display.
Next, a series of server Power-On Self-Test (POST) operations is displayed.
During POST, the display indicates the server test in progress by a spinning bar
beside the menu item. When the test is finished, the IMD shows a check mark
by the completed menu item. A check mark means that the test is complete, but
does not necessarily mean the test was free from errors.
If an error occurs during POST, the server logs the error to the IMD under
Unviewed Events and requires the user to view the error before proceeding to
any other menu choices.
If there are no errors, the Idle Screen Text appears. Figure 6-3 shows the default
screen but this screen could be different if the text changed during
configuration.

Navigation Buttons

To navigate through the menus, use the four buttons shown in Figure 6-4. The
UP and DOWN arrow keys ( and
screens and choose menu items. The right button ( ) acts as an Enter key and
allows the server to travel down through the menus. The left button ( ) acts as
an Escape key and allows travel back up the menu.
For use with Intel Pentium II Xeon processor-based servers only
) allow the user to move through the menu