Compaq ProLiant 5500 Setup And Installation Manual page 134

SCSI Cable Usage Matrix for Duplex Mode
Controller Hot-Plug SCSI Hard
Drives in Internal
Drive Cage
Integrated
Controller Port 2
See Note 5.
For use with Intel Pentium II Xeon processor-based servers only
Continued
2/4 DAT Drive
4/8 DAT Drive
Internal TurboDAT
Autoloader
8X SCSI CD-ROM
4/16 TurboDAT
15/30 DLT Drive
Connect 19-inch Connect 22-inch
point-to-point 3-device
non-terminated terminated SCSI
SCSI cable (199616-010)
(199606-007) from duplex
from SCSI Port 2 enabler board to
to SCSI Input 1 of the removable
duplex board. media bay
devices.
Use 50-to-68 pin
adapter (199618-
001) if needed.
See Note 2.
Compaq ProLiant 5500 Servers Setup and Installation Guide
7-19
35/70 DLT Drive
Connect 22-inch
3-device
terminated SCSI
(199616-010)
from duplex
enabler board to
the removable
media bay
devices.
See Note 2.
continued