Compaq ProLiant 5500 Setup And Installation Manual page 133

7-18 Cabling
SCSI Port 1
SCSI Port 2
Peripheral board
System board
SCSI Input 0
SCSI hard drives
Duplex board
SCSI Input 1
Duplex enabler board
Removable media bay
Controller
Integrated
Controller
Port 1
SCSI Cable Usage Matrix for Duplex Mode
(Duplex enabler board installed on drive cage backplane)
Hot-Plug SCSI Hard 2/4 DAT Drive
Drives in Internal 4/8 DAT Drive
Drive Cage Internal TurboDAT
Autoloader
8X SCSI CD-ROM
4/16 TurboDAT
15/30 DLT Drive
Connect 19-inch
point-to-point
non-terminated
SCSI cable
(199606-007)
from SCSI Port 1
to SCSI Input 0
of duplex board.
For use with Intel Pentium II Xeon processor-based servers only
Table 7-2
Connect 22-inch 3-
device terminated SCSI
(199616-010) from SCSI
PORT 1 to the removable
media bay devices.
Use 50 to 68 pin adapter
(199618-001) if needed.
See Note 2
35/70 DLT Drive
Connect 22-inch
3-device
terminated SCSI
cable (199606-
010) from SCSI
PORT 1 to the
removable
media bay
devices.
Continued