Compliance With International Regulations; Laser Product Label; Laser Information; Battery Replacement Notice - Compaq ProLiant 5500 Setup And Installation Manual

Compliance with International Regulations

All Compaq systems equipped with CD-ROM drives comply with appropriate
safety standards including IEC 825.

Laser Product Label

The following label or equivalent is located on the surface of your CD-ROM
drive.

Laser Information

Laser Type
Wave Length
Divergence Angle
Output Power
Polarization
Numerical Aperture

Battery Replacement Notice

Your computer is provided with a Real-Time Clock circuit powered by an
internal Lithium Manganese Dioxide or Lithium Vanadium Pentoxide battery.
There is a danger of explosion and risk of personal injury if the battery is
incorrectly replaced or mistreated. Replacement is to be done by a Compaq
Authorized Service Provider using the Compaq spare designated for this
product. For more information about Real-Time Clock battery replacement or
proper disposal, contact your Compaq Authorized Reseller or your Authorized
Service Provider.
For use with Intel Pentium II Xeon processor-based servers only
This label indicates that the product is
classified as a CLASS 1 LASER
PRODUCT. This label appears on a
laser device installed in your product.
Semiconductor GaAIAs
780 nm +/- 35 nm
53.5 degrees +/- 0.5 degrees
Less than 0.2 mW /10,869 W·m-2 sr-1
Circular 0.25
0.45 inches +/- 0.04 inches
Compaq ProLiant 5500 Servers Setup and Installation Guide
A-5