Dish Network 112182 User Manual page 80

Chapter 3
Using the System
Use this button to switch the VCR between its TV mode and its
VCR mode (see your VCR user's manual for information).
Press the blank Power button to turn the VCR on or off. Press
the TV power button to turn the TV on or off.
Press this button to turn the TV sound off or on.
Use these buttons to change channels on the VCR.
Note
the TV will not change channels.
Press this button to go back to the last VCR channel you used.
Press it again to switch between the last two VCR channels you
used.
•
•
•
•
•
•
Page 74
TV/Video Button
Power Button
Mute Button
Up/Down Arrow Buttons
: If you are using the remote control in Limited Mode,
Recall Button
VCR Buttons
Press the BACK button to rewind a videotape.
Press the PAUSE button to pause a videotape. Press this
button or the PLAY button to go back to play the tape.
Press the FWD ("forward") button to forward a videotape.
Press the STOP button to stop playing or recording on a
videotape.
Press the RECORD button to record on a videotape.
Press the PLAY button to play or to go back to play a
videotape.