Dish Network 112182 User Manual page 113

D D S
OLBY IGITAL OUND
What's
Happening
®
Instead of Dolby • Maybe the program you're watching
Digital sound, you doesn't have Dolby Digital sound.
hear only regular
• Maybe you selected the wrong sound
stereo or non-stereo
option on the Dolby Digital Setup
sound.
menu.
• Maybe the amplifier/decoder can't
process Dolby Digital sound.
• Maybe you didn't connect the receiver
to an amplifier/decoder.
E T
VENT IMERS
What's
Happening
You want to use You highlighted a future program in the
Quick Record, but Browse Banner, in the Program
the receiver displays Guide, or in a Themes list, and then
the Create an Event pressed the SELECT button.
Timer menu.
You try to set an You must enter the password before you
event timer and can set an event timer for a locked
the receiver program.
displays a message
that the program is
locked.
You try to set an You must order a pay per view event
event timer and before you can set an event timer for it.
the receiver
displays a message
that the program is
a pay per view
event.
You try to set an You've already set as many event timers
event timer, but as you can.
the receiver
displays an Error
message that gives
you the choice to
delete an event
timer you set
earlier.
You set an event Maybe you set a Reminder Event Timer
timer, but the but you should have set a DVR Event
receiver doesn't Timer, an Auto-Tune Event Timer, or a
tune to the channel VCR Event Timer.
of the program, or
doesn't record the
program.
What's Wrong
What's Wrong
Use the Troubleshooting Tables
What You Can Do
• Not all programs have Dolby Digital sound. Check the program's
Program Guide entry for the (DD) mark.
• On the Dolby Digital Setup menu, select the Dolby Digital Only
option if the amplifier/decoder can process only Dolby Digital signals, the
PCM Only option if the amplifier can't process Dolby Digital, and the
Dolby Digital/PCM option only if the amplifier can process both regular
and Dolby Digital sound. Note: If you select the
Dolby Digital/PCM option and the amplifier/decoder can't process
Dolby Digital, you could damage the speakers.
• If the amplifier/decoder can't process Dolby Digital, it won't provide
Dolby Digital sound. See the amplifier user's manual or call your audio
electronics dealer for more info.
• Make sure you connect an amplifier/decoder that can process Dolby
Digital sound to the receiver's back panel DOLBY DIGITAL output.
What You Can Do
To use Quick Record, highlight a future program but don't press
the SELECT button. Instead, press the RECORD button.
Note: You can use the Create an Event Timer menu if you want,
because it's almost as fast as Quick Record.
First enter the password, then you can set an event timer for the program.
First order the event, then you can set an event timer for it.
Delete one of the event timers you set earlier, and then you can set
a new event timer.
Remember, a Reminder Event Timer just reminds you the program is about
to start. An Auto-Tune Event Timer reminds you and tunes the receiver to
the channel of the program. A VCR Event Timer reminds you, tunes the
receiver, and starts the VCR to record. A DVR Event Timer reminds you,
tunes the receiver, and starts the receiver to record with the DishDVR
features.
Note: The receiver won't turn the VCR on, so you must leave it turned on.
Note: A DVR Event Timer can work only if the receiver has enough room
to record. See the DishDVR Features table for help.
Page 107