Dish Network 112182 User Manual page 68

Chapter 3
Using the System
Press the PAUSE button and then press the FWD button to forward the
program in slow motion. When you press the FWD button once the program
advances at 1/15 the speed of normal play. Press the FWD button twice to
forward at 1/4 as fast as normal play. Press the FWD button three times to
play the program.
Note
hasn't been broadcast yet.
Press the PLAY button to watch the program. Also, press this
button to switch from pause, forward, or reverse to play.
Press the SKIP BACK button to skip back about ten seconds in a
recorded program. Press this button again to skip back again.
Press the PAUSE button and then press the skip back button to
reverse the recording one frame at a time.
Press the SKIP AHEAD button to skip ahead about 30 seconds in
the program. Press this button again to skip ahead again.
Press the PAUSE button and then press SKIP AHEAD to advance
the recording one frame at time.
Note
hasn't been broadcast yet.
Press the VIEW button to catch up with the program as it's showing
now.
Use On-Demand Recording
Turn the receiver on and tune it to a channel.
Note
you'll have to enter the password to play back that program.
Start Recording a Program
Page 62
: Of course, you can't "forward" into the part of a "live" program that
: Of course, you can't "forward" into the part of a "live" program that
: If you record a locked program while you have the receiver locked,
• At a program's start, press the remote control's RECORD
button.
If you've watched a program from its start, up to about one
hour after it's started, you can reverse to its start:
1. Press the BACK button.
2. Let the program reverse to its start.
3. Press the RECORD button.
You'll get all of the program on
your recording.
: If you don't tune to a program
Note
until after it starts, you can record only
the part of the program that comes
after you tune to it.