Upgrade The Receiver Software - Dish Network 112182 User Manual

Upgrade the Receiver Software

Once in a while, we may upgrade your receiver's software for free. You can
set up the receiver to Receive a Software Upgrade and/or Set Up the
Receiver to Tell You About Upgrades.
Receive a Software Upgrade
1. Make sure you turn the receiver off, so its green front panel POWER
light is off. To do this, press the remote control's blank POWER button
while the remote control is in SAT mode.
2. While the receiver is taking the upgrade, the receiver's
front panel POWER light will blink. Don't disturb or
unplug the receiver while the new software is
downloading.
: The software upgrade may take up to about half an hour.
Note
Set Up the Receiver to Tell You About Upgrades
You can set up the receiver to tell you when you can get a software upgrade;
it'll ask you to let it get the software. Unless you set up the receiver to ask
you, automatically download new software without asking.
1. Press the MENU button.
2. Select the
System Setup
3. Select the
Installation
4. Select the
System Upgrades
5. Select the
Ask before downloading
option or the
Without my permission
option.
Note : A "download" is the same as an
upgrade.
6. Select the
Save
option.
option.
option.
option to save your choice.
Upgrade the Receiver Software
or:
Page 79 Page 79