Set An Automatic Event Timer - Dish Network 112182 User Manual

Set an Automatic Event Timer

1. Highlight and select a future program in the
Program Guide,
This opens the
Create an Event Timer
2. Select a Timer Type
shows up next to the option you select. For
example, here we selected the
3. Select a
Timer Frequency
mark shows up next to the option you select.
For example, here we selected the
option.
4. Only for a Once (one-time), DVR Event Timer,
you can select the
box. If you do this, a check mark shows up in
the box.
: When you protect a recorded program, the receiver will ask you
Note
before it records over that program.
5. Select the
Create
on the program in the
INFO button to get information about the program.
or in a list.
Themes
menu.
option. A check mark
option.
DVR
option. A check
Once
check
Protect Recording
option to set the event timer. You'll see a clock picture
, and also when you press the
Program Guide
, in the
Browse Banner
Use Event Timers
Tip: You can
protect any
recording so
that the
receiver will
not record
over it
without
asking you
first. Just
select Protect
Recording on
the Create an
Event Timer
menu.
Page 51 Page 51