Table of Contents
Advertisement
Importing an Image File
Importing an Image File
Importing With Form Assistant
5-8 OmniForm Procedures
This section describes how to use both Form Assistant and the Scan
Form... command to import an image file as a recognized OmniForm
form.
OmniForm can import and recognize black-and-white forms in either
PICT or TIFF format. Image resolution must be 200, 300, or 400 dots per
inch (dpi). If you have a fax modem, for example, you can receive a
faxed form and use the fax program's software to save the file in PICT
or TIFF format. OmniForm has the same import options for image files
as it does for scanned forms.
1
Double-click the OmniForm icon in the OmniForm folder.
Click the Form Assistant button in the standard toolbar if
OmniForm is already open.
Form Assistant appears.
2
Select Scan in a form and then click Next>.
3
Select Fax or Image File in the next window to recognize a form
that is in a supported image format.
This could be a form created in another program or one
received as a fax file.
4
Click Next>.
5
Select a file in the next window.
• Click Select... if you need to locate a file.
• Select a file in the Select dialog box and click Open to return to
Form Assistant.
6
Click Next>.
The next window only appears if a form is open already.
Proceed to step 8 if a form is not open.
7
Select to have scan the page as a new form and click Next>, or
to add the page to the currently open form and click Finish>.
Advertisement
Table of Contents
