Create The Text Objects; Create The Fill Text Objects - NUANCE OMNIFORM 2 REFERENCE FOR MACINTOSH Reference

Create the Text Objects

1 Click the Text tool in the drawing toolbar.
You need text objects named Customer:, Contact:,
Address:, City:, State:, Zip:, Job Type, Editing,
Tech Writing, Marketing Writing, Advertising
Copy, Rate:, Expenses:, Profit:, and Comments:.
2 Create the text objects in one of three ways:
• Click the Lock tool in the drawing toolbar to keep the Text tool
• Draw a text object.
• Draw a text object.
3 Line the text objects up approximately where you see them on
the form on page 3-21.

Create the Fill Text Objects

Customer Information
1 Click the Fill Text tool in the drawing toolbar.
2 Draw five fill text objects as described in step 2 in the previous
section.
3 Resize the objects as necessary.
selected.
Draw a text object, type its name while it is still selected, then
draw the next one, and so on. Click the Lock tool to deselect it
when you are done.
With the object still selected, choose Copy and then Paste in the
Edit menu. Keep choosing Paste until you have created as
many text objects as you need. Select each object one at a time
and type its name.
With the object still selected, hold down the Option key and
drag to create a copy. Repeat this for each new text object you
need. Select each object one at a time and type its name.
Tutorial 3 — Design Your Own Form
Tutorials 3-23