Redesigning Your Form
Sending Objects Front or Back
6-40 Designing a Form
• Select Center Horizontally to align the selected objects by their
horizontal centers.
Horizontal centers'
alignment midpoint
• Select Top to align all selected objects by their top edges.
• Select Bottom to align all selected objects by their bottom
edges.
• Select Center Vertically to align the selected objects by their
vertical centers.
Vertical centers
The objects align according to the chosen command.
You can use the Bring to Front or Send to Back commands in the Format
menu to layer overlapping objects.
Choose Bring to Front to move one or more selected objects in front of all
objects on a form.
Choose Send to Back to move one or more selected objects behind all
objects on a form.
Horizontal centers
Vertical centers'
alignment midpoint