Opening A Form - NUANCE OMNIFORM 2 REFERENCE FOR MACINTOSH Reference

Opening a Form

This section describes how to use the Open... command to open a form.
You can have up to 20 forms open at the same time.
To open a form:
1 Double-click the OmniForm icon in the OmniForm folder.
2 Click Cancel in Form Assistant if it appears.
3 Click the Open button in the standard toolbar or choose Open...
in the File menu to open the Open dialog box.
4 Make sure OmniForm Form is selected in the List Files of type
pop-up menu.
Select All Files instead to open a form created in any version of
OmniForm for Windows. Otherwise, only forms created on the
Macintosh are displayed. You can use the PC Exchange control panel
to make PC forms show as OmniForm forms.
5 Locate and select a file.
6 Click Open.
The form opens in the last view in which it was saved.
See Chapter 6, Designing a Form, for detailed information on defining,
moving, resizing, and creating fields, and other design functions.
See Chapter 7, Filling a Form, for detailed information on the kinds of
fields you may find on a form and how to fill them.
Opening a Form
OmniForm Procedures 5-21