Table of Contents
Advertisement
5
Enter offset measurements under Offset if you want.
This is useful if you want to position a graphic exactly in the
field, crop a large graphic, or move the graphic away from a
field border that would interfere with its design.
• Enter a number in Left to specify how far from the left side of
• Enter a number in Top to specify how far from the top of the
6
Select or deselect Transparent.
• Select Transparent if you want to be able to see information
• Deselect Transparent if you want the graphic to be opaque.
7
Click OK.
OmniForm imports the graphic and displays it in the fill
graphic field.
To delete an existing graphic:
Select None in the Source pop-up menu and click OK to delete an existing
graphic from a fill graphic field.
List Fields
Fields can contain a list of selectable entries. A pop-up menu arrow
appears when the cursor is in the field.
Click the arrow to open the list
Select an entry. The entry appears in the field.
If you enter a size larger than the fill graphic field, only part of
the graphic will be visible.
the field to place the graphic.
field to place the graphic.
behind the graphic.
Whether a graphic prints transparently depends on your
printer driver. See your printer documentation for
information.
You will not be able to see information behind the graphic.
Filling Fields
Filling a Form 7-7
Advertisement
Table of Contents
