Creating A Text Object; Creating A Line Object - NUANCE OMNIFORM 2 REFERENCE FOR MACINTOSH Reference

Creating a Text Object

A text object is most often used as a title, label, or header.
Text object used as label
1 Click the Text tool in the drawing toolbar.
2 Draw the text object.
3 With the object still selected, type the text you want to replace
the word Label.

Creating a Line Object

Use a line object to separate sections of a form or as a design element.
1 Click the Line tool in the drawing toolbar.
2 Draw a line.
To make sure a line is perfectly straight, hold down the Shift key
while you draw.
To rotate a line:
1 Click the Selection tool and select the line to edit.
A handle appears on each end of the line.
2 Place the cursor over one handle.
3 When the cursor turns into a crosshair, hold down the mouse
key and drag the end of line where you want it.
To rotate the line in 45-degree increments, hold down the Shift key while
pulling one of the handles in the desired direction.
Creating Objects
The State fill text field
Designing a Form 6-7