Nokia Firewall - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CONFIGURING DSMS REV 1 Manual

55
Integrating Nokia
Firewall Using
Syslog
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
N F
OKIA IREWALL
A STRM Nokia Firewall DSM accepts events using the following methods:
Integrating Nokia Firewall Using Syslog
•
Integrating Nokia Firewall Using OPSEC
•
You can integrate Nokia Firewall version NG AI R55 with STRM.
This method ensures the STRM Nokia Firewall DSM accepts Nokia events using
syslog. Before you configure STRM to integrate with a Nokia Firewall device, you
must:
Login to the Nokia Voyager interface.
Click Config.
Below the System Configuration heading, click System Logging.
In the Add new remote IP address to log to field, enter the IP address of your
STRM system.
Click Apply.
Click Save.
Using SSH, or a direct console connection, log in to the Nokia device as an
administrative user.
Note: If the SSH terminal is disabled, you must enable it though the Nokia Voyager
web interface. See your Nokia Voyager documentation.
Open the
/var/etc/rc.local
Note: If the file does not exist, you must create the file.
Add the following to the file:
$FWDIR/bin/fw log -ftn | /bin/logger -p local1.info &
At the terminal prompt, enter the following command:
nohup $FWDIR/bin/fw log -ftn | /bin/logger -p local1.info &
Configuring DSMs Guide
file.