Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CONFIGURING DSMS REV 1 Manual page 19

6 A
The STRM Array Networks SSL VPN DSM collects events from an ArrayVPN
appliance using syslog. For details of configuring ArrayVPN appliances for remote
syslog, please consult Array Networks documentation.
Once you configure syslog to forward events to STRM, you are now ready to
configure the sensor device within the STRM interface. To configure STRM to
receive events from a Array Networks SSL VPN device, choose one of the
following options:
•
•
For more information on configuring sensor devices, see the Managing Sensor
Devices Guide.
N
RRAY ETWORK
If you are using STRM 6.0, you must select ArrayNetworks SSL VPN from the
Sensor Device Type drop-down list box.
If you are using STRM 6.0.1 and above, you must select Array Networks SSL
VPN Access Gateway from the Sensor Device Type drop-down list box.
Configuring DSMs Guide
SSL VPN