Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CONFIGURING DSMS REV 1 Manual page 102

96 J R
UNIPER OUTER
Table 40-1 List of syslog Configuration Setting Variables (continued)
Parameter Description
Facility severity Specify the severity of the messages that belong to the named
facility with which it is paired. Valid severity levels are:
•
•
•
•
•
•
•
•
•
Messages with the specified severity level and higher are
logged. The levels from emergency through info are in order
from highest severity to lowest.
Regular-expression Specify text string that must (or must not) appear in a message
for the message to be logged to a destination.
This is an optional configuration setting.
Source-address Specify a valid IP address configured on one of the router
interfaces. For system logging purposes.
The source-address is recorded as the source of the message in
the messages sent to the remote machine specified in host
hostname statement at the edit system syslog hierarchy
level; not, however, for messages directed to the other routing
engine, or to the TX Matrix platform in a routing matrix.
You are now ready to configure the sensor device within the STRM interface. To
configure STRM to receive events from Juniper Router, you must select the
Juniper Networks Routing Platform, Juniper M-Series Multiservice Edge
Routing, Juniper MX-Series Ethernet Services Router, or Juniper T-Series
Core Platform option (depending on your Juniper platform) from the Sensor
Device Type drop-down list box. For more information on configuring sensor
devices, see the Managing Sensor Devices Guide.
For more information regarding your Juniper device, see your vendor
documentation.
Configuring DSMs Guide
any
none
emergency
alert
critical
error
warning
notice
info