Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CONFIGURING DSMS REV 1 Manual page 138
Configuring dsms
Hide thumbs
Also See for SECURITY THREAT RESPONSE MANAGER 2008.2 - CONFIGURING DSMS REV 1:
- Administration manual (370 pages) ,
- Manual (94 pages) ,
- Getting started (14 pages)
Table of Contents
Advertisement
132
N
A
ORTEL
PPLICATION
S
WITCH
2: Critical — Indicates that the condition of the system is critical.
•
•
3: Error — Indicates that the system has errors that should be corrected.
4: Warning — Indicates that the system is issuing a warning.
•
5: Notice — Indicates that the condition of the system is normal but with
•
significant conditions that need attention.
•
6: Informational — Indicates that the system is functioning but sending
information regarding certain unfavorable conditions.
7. Debug — Indicates that the system is sending debug-level messages.
•
You are now ready to configure the sensor device within the STRM interface. To
configure STRM to receive events from a Nortel Application Switch, you must
select the Nortel Application Switch option from the Sensor Device Type
drop-down list box. For more information on configuring sensor devices, see the
Managing Sensor Devices Guide.
Configuring DSMs Guide
Advertisement
Table of Contents
Related Manuals for Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CONFIGURING DSMS REV 1
Related Products for Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CONFIGURING DSMS REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - AQL EVENT AND FLOW QUERY CLI GUIDE
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - EVENT CATEGORY CORRELATION REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1
- Juniper STRM LOG MANAGEMENT 2008.2 - S 6-2008
- Juniper MEDIA FLOW CONTROLLER 2.0.4 -
- Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - NSMXPRESS SERIES II REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1
- Juniper MEDIA FLOW CONTROLLER 2.0.5
- Juniper NETWORK AND SECURITY MANAGER 2010.3
- Juniper 200 Series