Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CONFIGURING DSMS REV 1 Manual page 141

59
Step 1
Step 2
Step 3
Step 4
Step 5
N C
ORTEL
A STRM Nortel Contivity DSM accepts Nortel Contivity events using syslog. STRM
records all relevant events. Before you configure STRM to integrate with a Nortel
Contivity device, you must:
Log in to the Nortel Contivity interface.
From the menu, select Admin > Config.
Select the option to allow the switch to send system messages to a specific
machine.
Enter the IP address of the STRM system to which you wish to send logs.
In the Message Level section, specify the information you wish to send to the
STRM system. The options are:
• Urgent events — Indicates events that may pose security or access problems
and you wish to be notified immediately.
Normal events — Indicates the event for users and system interactions that
•
allow you to review switch activity.
• Detailed events — Indicates events for Nortel Networks Customer Support
personnel only.
All Section — Indicates events for Nortel Networks Customer Support
•
personnel only.
You are now ready to configure the sensor device within the STRM interface. To
configure STRM to receive events from a Nortel Contivity device, you must select
the Nortel Contivity VPN Switch option from the Sensor Device Type drop-down
list box. For more information on configuring sensor devices, see the Managing
Sensor Devices Guide.
For more information regarding your Nortel Contivity device, see your vendor
documentation.
Configuring DSMs Guide
ONTIVITY
F
IREWALL
/VPN