Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CONFIGURING DSMS REV 1 Manual page 97

38
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
J N
UNIPER
You can integrate NetScreen Firewall version 3.0 with STRM. A STRM NetScreen
Firewall DSM accepts NetScreen Firewall events using syslog. STRM records all
relevant NetScreen Firewall events. Before you configure STRM to integrate with
NetScreen Firewall, you must:
Login to your NetScreen Firewall user interface.
From the menu, select Configuration > Report Settings > Syslog.
Select the enable syslog messages check box.
Enter the IP address of your STRM system hosting the Event Collector.
Click Apply.
Click Policy.
Click Edit.
Select the Logging check box.
Click Save.
You are now ready to configure the sensor device within the STRM interface. To
configure STRM to receive events from a NetScreen Firewall device, choose one
of the following options, depending on which version of STRM you are using:
• Select NetScreen Firewall Appliance from the Sensor Device Type
drop-down list box.
Select Juniper Networks NetScreen Firewall from the Sensor Device Type
•
drop-down list box.
For more information on configuring sensor devices, see the Managing Sensor
Devices Guide. For more information regarding NetScreen Firewall, see the
NetScreen Firewall documentation.
Configuring DSMs Guide
S
ET CREEN
F
IREWALL