Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CONFIGURING DSMS REV 1 Manual page 82

76 IBM P M
ROVENTIA
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
S P
ANAGEMENT ITE ROTECTOR
Password:
<Password>
Polling Interval:
<Default Interval>
Click Save.
For more information on configuring protocols, see Configuring Protocols in the
Managing Sensor Devices Guide.
From the Administration Console, click the SIM Configuration tab.
The SIM Configuration panel appears.
Click the Sensor Devices icon.
The Sensor Devices window appears.
Click Add.
The Add a sensor device window appears.
Enter values for the parameters:
Parameter
Sensor Device Type
Protocol Configuration The protocol defined in
Device Hostname/IP
Click Save.
From the Administration Console menu, select Configurations > Deploy
configuration changes.
For more information on configuring sensor devices, see the Managing Sensor
Devices Guide.
For more information regarding your SiteProtector device, see your vendor
documentation.
Description
If you are using STRM 6.0, select ISS SiteProtector
•
If you are using STRM 6.0.1 or later, select IBM Proventia
•
Management SiteProtector
The IP address of the SiteProtector
Configuring DSMs Guide
Step 5