Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CONFIGURING DSMS REV 1 Manual page 58

52 E D
NTERASYS RAGON
Dragon Event: %DATE%,,%TIME%,,%NAME%,,%SENSOR%,,%PROTO%,,%SIP%,,%DIP%,,%SPORT%,
,%DPORT%,, %DIR%,,%DATA%,,<<<%PDATA%>>>
Step 6
Step 7
Step 8
Step 9
Step 10
Click the SNMP V3 tab. Click New.
d
The SNMP V3 Editor field appears.
Update values, as necessary:
e
- Change the server IP address to that of the STRM server.
- Do not change the OID.
- Inform — Select the check box.
- Security Name — Specify the SNMPv3 username.
- Auth Password — Specify the appropriate password.
- Priv Password — Specify the appropriate password.
- Message — Enter the following:
Note: Verify that the entered security passwords and protocols match data
configured in the SNMP configuration.
Click OK.
f
Separate the Notification Events logged:
Click the Global Options tab.
a
Click the Main tab.
b
Make sure that Concatenate Events is not selected.
c
Configure the SNMP options:
Click the Global Options tab.
a
Click the SNMP tab
b
Specify the IP address of the EMS server that will send the traps.
c
Configure the alarm information:
Click the Alarms tab. Click New.
a
Enter values for the parameters:
b
- Name — Enter a name of Juniper Networks-Alarm.
- Type — Select Real Time.
- Event Group — Select the newly created Event Group, Dragon-Events
(see Step 4).
- Notification Rule — Select the check box for the Juniper Networks-Rule.
Click Ok.
c
Click Commit.
d
Navigate to the Enterprise View.
Use the right mouse button (right-click) on Alarm Tool and select Associate Alarm
Tool Policy.
Configuring DSMs Guide