Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CONFIGURING DSMS REV 1 Manual page 132

126 N F
OKIA IREWALL
Integrating Nokia
Firewall Using
OPSEC
Step 1
Step 2
Step 3
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
You are now ready to configure the sensor device within the STRM interface. To
configure STRM to receive events from an Nokia Firewall device using syslog,
choose one of the following options:
• If you are using STRM 6.0, select CheckPoint Firewall-1 Devices via Syslog
from the Sensor Device Type drop-down list box.
If you are using STRM 6.0.1 and above, select CheckPoint Firewall-1 from the
•
Sensor Device Type drop-down list box.
For more information on configuring sensor devices, see the Managing Sensor
Devices Guide.
This method ensures the STRM Check Point FireWall-1 DSMs accepts FireWall-1
events using OPSEC. Before you configure STRM to integrate with a Nokia
Firewall device, you must:
Reconfigure Nokia Firewall using OPSEC, see
OPSEC.
Configure the OPSEC LEA protocol in the STRM interface.
To configure STRM to receive event from a Check Point device using OPSEC
LEA, you must select the LEA option from the Protocol drop-down list box when
configuring your protocol configuration. For more information, see Configuring
Protocols in the Managing Sensor Devices Guide.
Configure the sensor device within the STRM interface.
To configure STRM to receive events from an Check Point Provider-1 device using
OPSEC, you must select the CheckPoint Firewall-1 Devices via Syslog option
from the Sensor Device Type drop-down list box. For more information on
configuring sensor devices, see the Managing Sensor Devices Guide.
For more information, see your vendor documentation.
Reconfiguring Nokia Firewall Using OPSEC
To reconfigure Nokia Firewall using OPSEC:
To create a host object for your STRM system, open up the Check Point
SmartDashboard GUI and select Manage > Network Objects > New > Node
>Host.
Enter in the Name, IP Address, and optional Comment for your STRM host
Click OK.
Select Close.
To create the OPSEC connection, select Manage > Servers and OPSEC
Applications > New > OPSEC Application Properties.
Enter the Name and optional Comment.
Note: The name you enter must be different than the name entered in
Configuring DSMs Guide
Reconfiguring Nokia Firewall Using
Step 2.