Select the newly created Juniper Networks policy. Click OK.
Step 11
In the Enterprise menu, use the right mouse button (right-click) and select Deploy.
Step 12
You are now ready to configure the sensor device and SNMP within STRM . For
information on configuring SNMP in STRM, see the Managing Sensor Devices
Guide.
To configure STRM to receive events from an Enterasys Dragon device, choose
one of the following options:
If you are using STRM 6.0, select Enterasys Dragon IDS from the Sensor
•
Device Type drop-down list box.
If you are using STRM 6.0.1 and above, select Enterasys Dragon Network
•
IPS from the Sensor Device Type drop-down list box.
For more information on configuring sensor devices, see the Managing Sensor
Devices Guide. For more information regarding Enterasys Dragon, see your
Enterasys Dragon documentation.
Configuring DSMs Guide
53