Energy Saver (Preheat) Function; Auto Shut-Off Function - Kyocera KM-1530 Instruction Handbook Manual

4. Energy saver (preheat) function

This function turns the machine off to save energy by pressing the
Energy Saver (preheat) key, while leaving the main switch turned ON.
When this function is activated, the Energy Saver (preheat) indicator
is the only lit indicator on the operation panel.

5. Auto shut-off function

This function automatically turns the main switch OFF (O) if no
copying operation is preformed for a certain period (15 to 240
minutes). To make copies again, set the main switch to the ON (|)
position.
CHAPTER 4 BASIC OPERATIONS
* To resume copying after the energy saver (preheat) function has
been activated, press the Energy Saver (preheat) key again. It takes
a maximum of 30 seconds for the copier to recover from the energy
saver (preheat) function.
* The auto energy saver function can be set to trigger after no copying
has been done for a certain period of time. (See "Auto preheat time"
on page 6-7.)
Auto shut-off function
The auto shut-off function is a power saving feature which automati-
cally turns OFF (O) the main switch when a certain time elapses
without copying being performed. Copiers are generally in the
standby mode more than operation mode, and power consumption in
the standby mode occupies a large part of overall consumption.
Having the copier turn OFF (O) automatically reduces unnecessary
power consumption in the standby mode or at night when the copier
is left on. The result is a lower electricity bill.
* To change the time until the auto shut-off function starts, see "Auto
shut-off time" on page 6-7. To cancel the auto shut-off function, see
"Auto shut-off" on page 6-7.
4-6