Kyocera KM-1530 Instruction Handbook Manual page 12

CHAPTER 2 NAMES OF PARTS
(2) Operation panel
1 Start key (Indicator)
(Press to start copying. Copying is possible when the indicator is lit
green.)
2 Stop/Clear key
(Press to change the settings or number of copies to be made.)
3 Numeric keys
(Press to set the number of copies or enter the magnification
ratio.)
4 Reset key
(See " Initial mode" on page 2-4.)
5 Interrupt key (Indicator)
(Press to interrupt copying. The indicator will light green when the
key is pressed. See page 4-5.)
6 Energy Saver (preheat) key (Indicator)
(Press to set the power saving mode when the copier is not used.
The indicator is lit green while the power saving mode is ON. See
page 4-6.)
7 Manual/Enter key
(Press to manually select the paper or magnification ratio overrid-
ing the auto paper selection mode and auto magnification
selection mode. Also used to confirm selected items.
8 Copy quantity/magnification display
(Displays the number of copies to be made and magnification ratio
for zoom copying. When displaying the magnification ratio, % will
light. Also displays the copy status.)
9 Zoom (+) key
(Press to increase magnification ratio in zoom copying.)
0 Zoom (-) key
(Press to decrease magnification ratio in zoom copying.)
! Auto mode selection key/APS/AMS indicators
(Press to select the auto paper selection mode or auto magnifica-
tion selection mode. The indicators will light green in the respec-
tive modes.)
@ Recall % key
(Press to make copies in the zoom copying mode. See page 4-3.)
2-3
# Paper Select key
(Press to select a drawer or the multi-bypass. A drawer select
indicator and a paper size indicator will light green.)
$ Drawer select indicators
(The drawer [paper feed drawer] selected at present is lit green.)
% Misfeed location indicators
(If a paper misfeed occurs, the indicator corresponding to the
paper misfeed location lights red.)
^ Paper size indicators
(Indicates the paper size of the selected drawer or multi-bypass.)
& Original key
(Press to select the size of the original.)
* Original size indicators
(Indicates the selected original size.)
( Misfeed indicator
) Add Paper indicator
⁄ Add Toner indicator
(Lights red when the level of toner becomes low. See page 3-5.)
¤ Toner Disposal indicator
(Indicates when the waste toner tank needs to be replaced. See
page 3-5.)
‹ Maintenance indicator
(Lights red when the machine needs to be serviced. See page 8-
2.)
› Memory Overflow/Data Error indicator
(Lights red when the memory becomes full while scanning
originals.)
fi Copy exposure adjustment keys
(Press the left key to make the copy density lighter; press the right
key to make it darker.)
fl Copy exposure indicators
(In the manual exposure mode, indicates the selected copy
exposure level.)
‡ Image mode selection key/Auto Exposure/Text & Photo/Photo/Text
indicators
(Press to select the image mode. See page 4-2.)
— Auto Selection key (Indicator)
(Can be used when the optional ADF is installed. See page 7-2.)