Kyocera KM-1530 Instruction Handbook Manual page 36

CHAPTER 6 COPIER MANAGEMENT
Default code Setting item
Text original exposure adjust-
F06
ment
F07 Photo original exposure
adjustment
F08 Paper selection
F09 Auto magnification selection
mode
F10 Default drawer
F11 Automatic drawer switching
F12 Multi-bypass paper size
6-5
Setting contents
Adjusts the exposure for when text original is selected for
the image mode. The larger the setting code number, the
darker the copy density.
Adjusts the exposure for when photo original is selected for
the image mode. The larger the setting code number, the
darker the copy density.
Specifies whether the drawer with paper of the same size as
the original is automatically selected or paper size is
selected manually.
Sets whether to enlarge/reduce the image of the original
(see "Auto magnification selection mode" on page 4-3.)or
copy it at the same size when an original has been set and
the Paper Select key pressed.
Specifies the paper feed drawer to be selected automatically
when warm-up ends or when the Reset key is pressed (note
that there may be times when the default drawer may not be
selected, such as when the drawer is empty).
* This setting item will not be displayed if no optional drawer
is installed.
Sets whether or not to use the automatic drawer switching
function (see page 2-4).
Sets the paper size for the multi-bypass to make it available
for the automatic paper selection function (the paper size for
the multi-bypass will be fixed).
Setting code
1: 1 Light
2: 2
3: 3
4: 4
*
5: 5
6: 6
7: 7 Dark
1: 1 Light
2: 2
3: 3
4: 4
*
5: 5
6: 6
7: 7 Dark
1: Auto
*
2: Manual
1: Auto magnification
selection
*
2: Same size
1: Drawer 1
*
2: Drawer 2
3: Drawer 3
4: Drawer 4
1: ON
*
2: OFF
1: 11" x 17"
2: 8 1/2" x 14"
3: 8 1/2" x 11"
4: 5 1/2" x 8 1/2"
5: 11 x 8 1/2"
6: U (no size setting)
*
Setting value of the non
standard size paper width
for the multi-bypass