Border Erase Mode; Sheet Erase; Book Erase - Kyocera KM-1530 Instruction Handbook Manual

5
Press the Start key. Copying will start.

2. Border erase mode

(1) Sheet Erase

Use for erasing shadows, lines, etc., that appear around the edges of
copies made from sheet originals. The border width can be selected
from 1/4", 1/2" and 3/4". (a in the illustration is the width of erasing
border.)
* The Sheet Erase mode requires the optional memory board.
* The initial value of the erasing boarder width can be set. (See
"Border width" on page 6-6.) This initial value is common to the
Book Erase mode.

(2) Book Erase

Use for making neat copies from thick books. The border width can be
selected from 1/4", 1/2" and 3/4". (a in the illustration is the width of
erasing boarder.)
* The Book Erase mode requires the optional memory board.
* The initial value of the erasing boarder width can be set. (See
"Border width" on page 6-6.) This initial value is common to the
Sheet Erase mode.
CHAPTER 5 FUNCTIONS
5-2